Category: Blog

  • MOT passed

    Hurray. Got another years MOT. The car was well recieved at the garage, “a real car for a change”

    Only got a few advisories: I reckon that is good. The front wheel bearing have some play and the handbrake only just passed.

    Was surprised that my 1969 Vitesse needs a better more efficient hand brake than a modern car. Why so? The handbrake on a Vitesse is a secondary brake because of the single circuit main brakes, so must be 25% efficient. On a modern car a handbrake is the third brake system after the dual circuit brakes, so can be as little as 16%.

  • Kenlowe – wiring

    I had been thinking about trying to get the warning light to work on the override switch. So when fellow blogger Martin Randle http://raidertr7.blogspot.com/ mentioned he was having trouble getting the light to come at the right time I had a rummage and found the fitting instructions. Here is the wiring diagram hope it helps.

  • Job done

    All ready for the MOT now. Did not spend Friday night sorting the car after all so did not get the MOT done today. Will have to sort it next week. Need it ready for a trip to the Triumph do at Stoneleigh.

    Cut the studs on the number plate light down to size this morning and fitted that. Have a reversing light again. How long will that last I wonder? I read on a message board recently that the new light may not last well.

    The handbrake and horns both needed fixing. If that is the limit of what is needed to pass the MOT this year I will be well pleased.

  • Steering linkage – the rebuild

    The new linkage fits a treat.

    Putting the steering back together I found why the horn had stopped working. The wire was no longer attached to the slip ring at the end of the column. I tried to resolder the wire without taking the slip ring out. Silly boy. Had to drift the ring out. Much easier to solder the horn wire onto the slip ring with it out and held in the vice jaws.

    The last time I was dealing with these parts I seem to remember it just falling out. I wonder why it was sticking this time – how can the top of the column shroud have changed shape?

    I finished putting all the switches back into the column. Will complete the rebuild tomorrow night.

  • Steering linkage removal – part 3

    The replacement lower steering column arrived today at work, so I know what I will doing tonight – putting the steering back together. I ordered online Sunday it arrived first thing Tuesday excellent.

  • Steering linkage removal – part 2

    I have attacked it with WD40, heat, big hammer and an angle grinder. The linkage just will not let go of the lower part of steering column.

    Time for some time out and something to eat.

    Looks like will have to either source another lower column or buy a drimel to carefully carve off the linkage.

    After a good cup of tea and some surfing have decided to give in and buy a replacement lower steering column.

  • Newark Autojumble

    I have bought a late Triumph 2500S head which is my excuse to go the Newark Autojumble today so I can pick it up. Picked up the head and looked around at the jumble. My best purchase was a section of tough foam like a judo mat which should make lieing on the garage floor more bearable. Took some pictures in the classic carpark.

  • Steering linkage removal

    Got the linkage to let go of the rack no problem, but getting it off the lower column is proving more difficult. The linkage had been painted over with black underseal so the first job was getting that off so I could get at the bolts.

    Lots of WD40 and nut splitter have got the other bolt out of the top of the linkage. I can not get the thing off the column so will have to resort to completely dismantling the steering tomorrow. Hopefully if I get the lower column clear of the car I can attack it better on the work bench.

  • Rear number plate light

    Got a new rear light from Tim Hodgekiss http://www.vintagemotorspares.com/ last year at the NEC classic show. Unfortunately the studs were not straight. He replaced it I have just got round to trying to fit it. Thought that MOT man might want to see the reversing light working. All the other lights work.

    This time I find that the studs are good and straight but too long. They are so long that the bracket that the lamp fits to will not fit back on the boot lid.

    Will have to cut the studs shorter. Have got a UNF die to clean the tread up afterwards.

  • Steering linkage

    Another item on my MOT list. I had wanted to upgrade the steering linkage and use something I had seen on Bill Davies http://www.rarebits4classics.co.uk/ website. He has not been able to supply so with time running out I picked a linkage from eBay (the Jumblemaster)

    and also ordered a standard one from Canley Classics to ensure that I had something in hand.

    Both arrived today at work.