Triumph 2-litre and 14-60 Dolomite and Vitesse 1937-38 – Motor Trader service data 1938
Triumph 1937-38 2 litre and 14-60 page_1
Originally published in the trade paper Motor Trader during 1938, this article is about the Triumph 2-litre and 14-60 Dolomite and Vitesse models built before the second world war. This 6 page guide to the service data includes diagrams of the dashboard, wiring and maintenance chart.
This copy of the Triumph Dolomite 1500 Workshop Manual known as the Repair Operation Manual has been processed so that you can search it by word. You can view and download it from my box.net account. https://app.box.com/s/uwy8anbmq0schbsr3d6xmuap324for4m
A video I have made from a Standard Triumph training film strip. Thanks to Adrian Hebron for scanning the original film strip.
These film strip were made by the technical department at Standard Triumph. I have uploaded several to YouTube which you can see here. Film strip play list
I have made PDF copies of the booklets handed out after the film strips which you can see on my website. Service Training Notes.
I have recently been sent a scanned copy of – Triumph Herald 948 + 1200 disc brake conversion – part 511045 fitting instructions. Here is start from the booklet. The booklet was originally published by Standard Triumph and was scanned by Paul Cattrell.
DISC BRAKE CONVERSION KIT FITTING INSTRUCTIONS PRELIMINARIES Disconnect the battery, jack up the car and place supporting stands under the chassis frame. Remove all road wheels. Attach a length of rubber tubing to one of the front brake bleed nipples and suspend the opposite end of the tube in a clean container. Unscrew one front bleed nipple one turn and by operating the brake pedal, pump the hydraulic system dry.
Front Brake Assemblies Disconnect and remove both bundy pipes which connect the flexible hoses to the 5 way connector. Release the outer ends of the flexible pipes and unscrew them from the wheel cylinders. Remove the brake drums, hubs, brake backing plates and stub axles.
I have recently been sent a scanned copy of – Triumph Herald 1200 Twin Carb conversion – part 511037 fitting instructions. Here is a paragraph from the booklet. The booklet was originally published by Standard Triumph and was scanned by Paul Cattrell.
TWIN CARBURETTOR CONVERSION KIT
Part No. 511037
Introduction
A twin carburettor conversion kit contains all necessary components for converting a Herald “1200” engine of, 8,0:1 compression ratio, from
the single to the twin carburettor condition.
To achieve maximum performance conducive with safe operation of the
engine, when twin carburettors are fitted, existing main bearings, valves,
valve springs, ignition distributor and camshaft must be changed.
Existing cylinder heads must be machined to raise the compression
ratio to 8,5:1. Polishing the ports is unnecessary, but if undertaken care
must be exercised not to destroy the abutment faces for the manifold
locating sleeves.
People have been tuning and modifying the Triumph Vitesse for many years. Hot Car magazine May 1969 featured a Vitesse that had a Jaguar 3.8 engine in it.
The car was said to do 130mph and to have 250bhp. It was built by the well known Downton engineering. Based on a shortened Jaguar XK150 chassis. The Triumph Vitesse body was altered to fit.
More material about this car featured on Facebook recently.
Standard Triumph used to produce technical training materials for mechanics. Like me you have probably seen and may have copies of some the Service Training Notes booklets. I have shared several via a page on my website.
Thanks to Adrian from New Zealand who has scanned several of the film strips in his collection.