Category: Blog

  • Triumph Enthusiasts Club Belgium

    The Triumph Enthusiasts Club Belgium are building a new website: http://tecb.be/.  Have you got any Dutch Triumph literature that has already been scanned that they can make available to their members.  They have got some of the English stuff from my website http://www.vitessesteve.co.uk/ already..

  • Newark autojumble

    Not many Triumphs at Newark autojumble today. This Herald was for sale.

    .

    Wildest car was this 480inch 7.8 litre Gasser a local car.  As normal a lot of motorbike stuff.  Got the nitrile gloves and a small sheet of 0.9 mm alloy I was after.

  • Brooklands 2014

    The annual Standard Triumph forum show was at Brooklands for 2014.  What a place never been before, it would have been value for money even without the Triumphs.  The Wellington bomber and Hurricane in one of the hangers were in a stage of being rebuilt so seeing all there insides was very interesting.  I had not realised that 2nd world war planes still had large areas of their bodywork made from coated clothe.

    On my way to see the banking I passed this car.  An AC Ace built at Brooklands. That banking is very steep.

    There was a good turnout of cars. Including a some of the less often seen oldies.

  • Its covered

    Fitted my new Specialised Covers Stormshield cover over my TR7
    Sprint convertable. Looks to be an excellent product. Fits very well,
    they made it to fit over my non-standard Honeybourne Mouldings hardtop.

    Only problem I can see is that to use the straps that pass under the car I have to lie on the ground to pass the straps under the car.  Car gets new cover and stays snug under its cover but I get wet and or dirty laying on the drive to fit the straps.

    There is enough room under the cover for the stubby radio aerial on the rear wing to be folded down.  I was offered the option to have Velcro slot for the aerial to poke throu the cover.  I like the contrast colour for the door mirror pockets.

    PS This blog features on the Club Triumph website along with many other Triumph blogs.  I got a helpful suggestion from there – use an extending metal measuring tape under the the car to pull the strap from one side to the other.

  • Practical Classics Star

    The original build of my TR7 Sprint was featured in Practical Classics November 2000.

    I have a scan of the article

  • TR7 Strut braces

    A recent exchange on the Club Triumph forum lead to me having a look into TR7 strut braces.  I have seen them for sale on eBay and some traders such as S & S Preparations and Robsport sometimes have used ones for sale.

     Made by Andy Healey http://andystr7blog.blogspot.co.uk/

    TS Imported Automotive Triumph TR8 Srut brace

    Seen (10-11-2013) this on a USA trader site http://www.tsimportedautomotive.com/

    The Wedge Shop another USA based trader http://www.thewedgeshop.com/ stock this interesting looking version (10-11-2013).

    Demon Tweaks used to sell a TR7 strut brace but it appears that it currently listed as NLA no longer available.  Beans http://www.tr7beans.blogspot.co.uk/ has one fitted to his car.

    Beans TR7 strut brace 05/2010

    Interesting threads: http://www.forum.triumphtr7.com/topic.asp?TOPIC_ID=12644&SearchTerms=struct,brace

    Struct brace in Triumph TR7 Sprint.

    Struct brace in Triumph TR7 Sprint.
    TR7 V8 Strut brace - Christoper Kenneth Smith - V8

    Christopher Kenneth SMITH on the TR Register has the above fitted to his TR7 V8.

    John Walsh fabricated a very comprehensive brace in his 1981 Buick V6 engined car.

    John Walsh TR7 Buick V6 Struct brace

    01 December 2015 –
    From a very modified car built in the USA comes this strut brace.

    Another TR8 V8 modified car hot rodded by D&D fabrication – as owned by Eric Graves in the USA

    20 July 2016 –
    A modified Sprint engined car in the Queensland Australia owned by Matthew Taylor, showing the shiny brace. One from a small batch made in Sydney.

    This one is based on a VW Golf GTI strut brace.

    John Metcalfe VW Golf GTi strut
    John Metcalfe VW Golf GTi strut

    Australian alumiumTR7 strut brace.

     

  • TR7 Sprint heater hose

    TR7 Sprint heater hose

    My TR7 Sprint has its heater attached to the engine via some custom plumbing. Here is a picture of the hoses that link the pipes thru the bulkhead to the custom pipe work. Do these look like the normal heater hoses? Are they available separately? I wonder how much are they?

    I have tried using lengths of straight rubber but that does not work as the ends to be linked are not inline and there is it not enough room to use a curved straight piece, so I need a hose that is curved as shown in the photo.

    They connect to the steel heater pipes that come throu the bulkhead at one end. At the other end having passed to the inlet manifold side of the engine they connect to more metal pipework that in turn connects to the manifold etc. Here are some more pictures to show the detail.

    I suppose I may end having to fit a Sprint adapter plate. I want the car back on the road so have refitted the old hoses for now.

    Here is a picture of a Dolomite Sprint engine (thanks Beans http://tr7beans.blogspot.co.uk/) Seems this the basis of the heating plumbing on my engine.

    Triumph Dolomite Sprint engine - showing heater hoses etc
    Triumph Dolomite Sprint engine – showing heater hoses etc

  • Swapping out the heater and mystery wiring

    TR7 dashboard area showing interior with heater out
    TR7 dashboard area showing interior with heater out

    This morning I got the heater out.  A quick call to Rick at S&S Preparations showed that I had missed a couple of fastening that go throu the bulkhead.  To be fair they were covered in a layer black stoneguard so were not easy to see.

    Getting to the heater box has meant taking all the fascia out.  To get the fascia out had remove the lots of other stuff/trim: the a-post covers, the switch panel, the gear lever console, the steering wheel, the instrument panel, the drivers seat. As my car had various extra had to disconnect the radiator fan override, some of the radio wiring, disconnect the oil pressure gauge from the bottom of the fascia.

    Hidden ignition switch and green radiator fan over-ride switch
    Hidden ignition switch and green radiator fan over-ride switch

    Whilst the car is in this state I will able to investigate the mystery extra wiring.  There is a hidden key/ignition switch which is wired into the ignition loom – trouble is I do not have the key – the switch was well hidden I only found it when I was in the footwell looking up.  The flick switch to the left of the steering is still a mystery – it is linked into the radio wiring – which is a really complex bunch of colored wires – think I will leave that alone as it works.  Intend to add a proper separate earth for the radio rather than continue to relay on it being lopped into the earth on the back of the rheostat.

    oil pressure gauge and mystery switch no2
    oil pressure gauge and mystery switch no2

  • TR7 Wiper blade fitting

    Triumph TR7 wiper blade fitting
    Triumph TR7 wiper blade fitting

    I need to fit new wiper blades but most traders now only stock click fit style.  As can seen from the picture above the TR7 wiper blades attach via a pin.  The TR specialist I contacted did not have any in stock –  I saw some advertised on eBay which promised to include a fitting kit and were advertised to fit TR7 so I ordered them. Unfortunately the was no fitting kit so still no fix.. Am waiting for the eBay trader to sort it out. Have put up this post so I can refer them to the picture to show them the problem.

  • More snow

    Too cold this morning to drive the still heater-less TR7 so it will have to be the Skoda.