Triumph Spitfire 4 Stage Tuning and Competition Preparation

The Triumph Spitfire 4 Stage Tuning and Competition Preparation book is the next item from the batch of books and manuals rescued by Colin Wake.  It was originally published in March 1965.

You can read or download the book from here:

To give you an idea of what the book covers here is the Forward page.

Forward

Since the introduction of the Spitfire 4, there has been an increasing demand for improved engine performance to assist owners when participating in competition events. To meet this demand, Standard-Triumph engineers have undertaken considerable re-development work which has enabled them to increase the power of the Spitfire engine unit and to make available the following two stages of tune. Each stage involves the use of all components listed under the appropriate heading on pages 13, 19 and 20.

The “Interim Stage”, giving 70 b.h.p., requires very little modification to a basic engine, the differences being confined primarily to the fitting of a Solex compound carburettor with aluminium inlet manifold, a four-branch exhaust system and raising the compression ratio to 9.75 : 1.

The “Stage II” tune is an extremely comprehensive racing conversion which makes possible a power output of 90 b.h.p. approximately. This is achieved by using a four-port cylinder head of 10·5 : 1 compression ratio with two Weber carburettors, a modified camshaft and a four-branch exhaust manifold. When making this conversion, serious consideration should be given to the instructions made in the text regarding the use of a stronger crankshaft, pistons and connecting rods, diaphragm clutch and a
modified gearbox.

Being supplementary to the Workshop Manual, which should be used when general data, special tools, nut tightening torque and detailed dismantling and assembly procedures are required, the content of this booklet is confined to listing new data,
homologated parts, and to explaining the additional work and preparation necessary for achieving the best results from the kits. Notes on additional items of equipment and special processes are given under “Optional Recommendations”.

The Workshop Manual, Part No. 511243, retails at £3 3s. Od. and may be obtained from Standard-Triumph Distributors or Dealers. Parts and Manuals are not obtainable direct from the factory.

Selection of Modified Parts

The Spitfire model specification in standard tune provides a sports car with outstanding reliability and performance. It is generally accepted, however, that any increase in performance in excess of manufacturer’s standard specification will result in increased wear rate and induce additional stresses in all mechanical components, resulting in a shorter working life. It is suggested, therefore, that owners contemplating increasing the performance of their models select the simplest form of tune which meets their requirements.

Conditions of Sales

Standard-Triumph Sales Limited reserve the right to vary, at any time, the prices quoted. All goods are invoiced at prices current at the time of purchase and do not include fitting charges.

The descriptions and illustrations appearing in this book are not binding. The MANUFACTURER, therefore, reserves the right-whilst retaining the basic features of the Models herein described and illustrated to make at any time, without necessarily bringing this book up-to-date, any alteration to units, parts or accessories deemed

Copyright Notice
I am sharing this book and not seeking to profit from its distribution. If you have any claim to the book or its contents please let me know. 

 ———————————————

 If you like this may also like the Triumph Herald Spitfire Tuning & Modification book

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.