Category: part

  • Spring cleaning

    Spring has come early to my house. We have started tidying up our cellar. I have had a large amount of my car stuff down there.

    Finding stuff I had long forgotten. Found a clutch cover and driven plate but what car is it off?

    Also lots of suspension parts including three lever arm dampers, one appears unused. I have thrown some bits away – I wonder why I ever kept this clutch slave cylinder.

  • J -type Overdrive – to be sorted + NEC show

    I have been driving with a overdrive that stops working as the car warms up. Have done the easy checks – the oil level is fine. Had resigned myself to spending quite a bit of money on a recon. Well on my way to the NEC show I dropped in at Canley Classics and Dave Pearson talked me into a money saving idea – just try fitting a new solenoid. Great idea if it works and even it does not the money will not have been wasted as a new solenoid would be a part of a recon job on the whole unit.

    And so onto the NEC. Friday is more expensive that Saturday and Sunday plus it much easier to see the cars. As always my Vitesse was one of very few classics in the car park. I wonder how many of the crowds at the show actually ever drive their classics or do they even have a classic back home at all.

    Here are some pictures.



  • Maintenence and a sale

    Whilst doing some maintenece on my website I found this set of instructions for fitting the tonneau cover to Herald or Vitesse.

    Only a start but have made my first eBay sale. A set of 5 wire wheels I sold were picked on Saturday by a nice couple who are finishing off a Gentry.

  • Half Tyred

    I have at last got around to replacing the front tyres on my Vitesse. Had the tracking checked and it was at 7.5 rather than 1.5 toe in. How did it get like that? Normal wear and tear occording to the tyre bay chaps at Selecta Tyre Ltd. 2 Vredestein T-Trac 175/70 for £55.56. Had them inflated with nitrogen just like F1 for an extra £1.25 a tyre. Total with balance and tracking £108.53, not bad I reckon.

  • Dig out those parts

    Meet up with a couple of fairly local Triump folk and their cars at the Cadwell race meeting.

    Unfortunately my camera battery was out of power so have borrowed these pictures from the TSSC website.
    Agreed to sort out some Herald bits and pieces I have aquired and pass em on to Andrew.
  • 99p – Bulkhead


    Yesterday I collected this eBay bargain from Bob. The A posts below the screen and the floor pans look better than on my car. Bob also sold me a spare boot insert panel that I can refurbish and replace the now rather rusty one on my car.

    It was a 320 miles round trip to Epsom an uneventful journey. Only embarrassing bit was not being able to open the rear doors at first – there was a separate button on the key fob – but only found it after phoning the hire firm to ask.

  • Vitesse Parts manual

    I have added a copy of the pdf version of the Vitesse parts manual to my website at: vitessesteve.co.uk/Service%20manuals/Service%20manuals.htm

    Should make things easier when trying to order bits from work!

  • 4 door Vitesse at Stoneleigh 2007

    Out Saturday night til late so was always going to be a quick visit any way. Got to the show for 1.00pm.

    Was looking for a decent secondhand door or a door skin but found some treasure on Mark Field http://www.jigsawracingservices.co.uk/ stand. New old stock doors for little more than the skins a real bargain!

    Now how the hell am I going to get them home? I had no tools in car having had a tidy up post MOT. So had to buy a cheap set of spanner for £1.00. Then had to take the passenger seat out and pack it upside down behind the drivers seat. Then I used the tow rope to tie the 2 doors against the roll cage and passenger door handle. Got some strange looks in the carpark.

    A good show I got to talk to several people I have meet in cyber space. Meet a couple of french Triumph people and got to practice my school boy french – a common interest made communication easier.

  • Kenlowe – wiring

    I had been thinking about trying to get the warning light to work on the override switch. So when fellow blogger Martin Randle http://raidertr7.blogspot.com/ mentioned he was having trouble getting the light to come at the right time I had a rummage and found the fitting instructions. Here is the wiring diagram hope it helps.

  • Newark Autojumble

    I have bought a late Triumph 2500S head which is my excuse to go the Newark Autojumble today so I can pick it up. Picked up the head and looked around at the jumble. My best purchase was a section of tough foam like a judo mat which should make lieing on the garage floor more bearable. Took some pictures in the classic carpark.