Category: vitesse

  • Wyl assists in disposal of a dead body

    We used my Vitesse to tow my other halfs dead little Renault 5 out of the yard for Tommy Croyden and daughter “the wrecker” to take it away. The 5 had stood awhile and one of the tyres was almost completely flat, so I had to pull pretty hard to get the thing to start moving – a little slipping the clutch was needed to start. Used a tow rope on the Vitesse tow bar. No real problem doing the job the Vitesse has alot of low down grunt. I wonder how many Triumphs get used for towing.

  • 4 door Vitesse at Stoneleigh 2007

    Out Saturday night til late so was always going to be a quick visit any way. Got to the show for 1.00pm.

    Was looking for a decent secondhand door or a door skin but found some treasure on Mark Field http://www.jigsawracingservices.co.uk/ stand. New old stock doors for little more than the skins a real bargain!

    Now how the hell am I going to get them home? I had no tools in car having had a tidy up post MOT. So had to buy a cheap set of spanner for £1.00. Then had to take the passenger seat out and pack it upside down behind the drivers seat. Then I used the tow rope to tie the 2 doors against the roll cage and passenger door handle. Got some strange looks in the carpark.

    A good show I got to talk to several people I have meet in cyber space. Meet a couple of french Triumph people and got to practice my school boy french – a common interest made communication easier.

  • Heated screens

    A fellow Triumph Sports Six Club member has posted this on their messageboard.

    Heated Screens, anyone? Posted By : Jason Green, 09-Nov-2006, 08:24pm
    If any one is interested in a heated screen, please register your interest here.
    Current project is for heated front and rear screens for the Herald/Vitesse and heated rear screens for the GT6.
    All screens are laminated.
    The minimum production run is 15. So when we reach 15 names for each type I’ll contact all by PM to confirm.
    Prices are from £140 for the front, £120 for the GT6 rear screen and £140 for the Herald/Vitesse rear, all subject to VAT.
    I’d like a Vitesse front.
    Next, please.
    ———–
    I would like 1 front screen and 1 rear screen for my Vitesse. If you are interested you can either visit the TSSC messageboard or contact me and will pass your message to Jason.

  • Transmission failure – not mine

    I have read a tale on: http://www.justdrive.ca/gt6/ which reminded of a not dissimilar incident that befell my Vitesse some years ago. So sent poor Andre an email.

    Sorry to read of your news.

    I had the bell housing fail on my Vitesse at speed some years ago. The gearbox started to come through the transmission tunnel. (Fortunately into the passenger foot well.) I was pushing the car hard at least 4500rpm in overdrive top!

    I guess that the bell house broke first which left the gearbox attached to the prop. Being attached to the prop rather than the bell housing the gearbox broke through the tunnel. The continuing motion of the car pulled the prop off the end of the gearbox, the UJ jokes were smashed. There was a hell of a lot of noise. Fortunately the road was empty and I was able to pull the car up straight.

    At the time it was a very unusal event for nobody in the West Midland Triumph community in the UK had ever seen such a thing. The recovery driver told me how lucky I was that the prop runs above the chassis at the transmission as he remembered picking up the remains of an old Ford where the prop had dropped and dug into the road!

    Take a look at his pictures: http://www.justdrive.ca/gt6/06/0904/slides/DSCN1285.html

  • Dipping rear view mirror


    I have a dipping rear view mirror in my Vitesse. I think it came from a big saloon. Trouble is it now tends to shake at speed.

    What dipping mirror would fit to the Vitesse that a Triump breaker might have?I missed this http://cgi.ebay.co.uk/ws/eBayI…..3AMEDW:IT&rd=1which would have been ideal.

    I know I could get a mirror from somewhere like Halfords that would need sticking on the glass or hold on by suction but would prefer a Triumph part if poss.

    I also know that the sun visors will need cutting down to size as all the dipping mirrors are bigger than the original equipment non-dipping mirror, unless you know of a small dipping mirror.