Author: StephenWeblin

  • Lenham (actually Honeybourne) Hardtop refurb starts

    Time to start thinking about the hardtop refurb. Needs to replace the crazed perspex rear window with the heated glass one I have. Not sure how to hide the heater element wiring at this stage.

    The hardtop has these fastening on each side which I will tie down to the drop top iron work with cable ties.

    The roof has an interior light fitted centrally above the rear window. I just need to link the wiring from the roof into the existing circuit.

    Got this diagram from Maxwell on the TR7/8 forum so now have idea of how the missing hardtop fixing should look.

  • Sprint – work in progress

    Got down to making the TR7 more comfortable and practical today.

    Fitted the new rear view mirrors. The mountings on the doors were not quiet the same as the modern fixings. I left the pedestals in place but had to substitute the part the grub screw holds onto for the new plastic parts that come with the mirrors.

    Fitted new the thermostat. Now the radiator hoses stayed cold, ran the engine for 20 minutes and still the Kenlowe did not cut in. The water temp gauge only got to 1/2 way – will see how it goes when I actually drive the car on road. The heater hoses got hot but still very little heat into the cabin. Next will try flushing the heater matrix to see if that improves things. If that fails will have to replace the matrix.

    Fitted the Lenham hardtop. Will have to sort out a rear fastening to keep the back down but am sure the hardtop will be warmer and drier than the soft top. Will use a couple of cable ties for now. Several of the studs and poppers on the soft top, along the deck, would not let go, another job to investigate. Tried using a trim removal tool to lift the fastenings open put they would not budge. Wonder how I can do to get them to let go.

  • Sprint heater

    Had the engine running for over 15 minutes today, wanted to check that the Kenlowe cut in. Seems like the thermostat is stuck open because both the top and bottom radiator hoses were warm to touch and the fan never came on. The temp gauge never got much past 1/3. If fitting a new themostat warms things up I will be happy.

    PS The new thermostat and gasket arrived over night from S&S Preparations – great service. No Xmas delay in the post from Bacup to Newark.

  • Lenham hardtop

    Went to Preston to pick this Lenham hardtop up yesterday. Other than the back window it is in good nick. At less than £200.00 a bargain. Should make winter motoring in the TR7 Sprint more comfortable. Just need to work out how to fix the back end to the car.

    The rear window is the same as on the DHC TR7 so that is another thing to pick up from S&S Preparations.

    Turns out this actually a Honeybourne Moulding top not a Lenham.

  • TR7 Sprint

    Picked up the car yesterday. First stop was at Canley Classics to get some decent convex rear view mirrors. Embarrassingly the car refused to start and was bump started by Dave Pearson and the ANC delivery man – thanks chaps.

    The heater does not work(‘‘)so I stopped at Leicester Forest services to get warm and had to call for help when the car refused to restart.  Was bump started in the service car park.

    Understand that working on the heater is a dashboard out job so it will have wait. Body work is very good and shiny however some other bits need some work.

    The fascia lights do not work
    the heater does not work
    the rev counter jumps and sticks
    no tools or handbook
    spare tyre looks like the original!
    the hood has a couple of tears in it

    the door mirrors are flat intend to fit convex ones

    other than that it is beautiful!

    The car came with a copy of Practical Classics Nov 2000 in which is was featured.

  • Spitfire bits needed

    I am a student on the Leeds City College classic car course.  One of the cars I will working on is Spitfire.  The car is incomplete – no interior stuff.  Some repairs have been done but before we can build up a rolling chassis we need some parts. Here is a provisional list.

    1*Dolomite Sprint alloy
    2*seats
    Other interior such as carpets, dashboard.

    Has anybody got a free wreck we can strip out the interior out from.
     
    Would be great if a local business could help out.  Will ask the Spitfire Graveyard and Yorkshire Triumphs

    Read more about the course here

  • Spitfire looking for love

    I have just finished my first week at Leeds City College as a student on their Classic Car Restoration course – great fun with an interesting group of students.

    Amongst the many cars for us students to work on is Triumph Spitfire. These 2 images taken on my phone do not show how crusty it really is. Will try to get some better pictures later.

  • Standard Vanguard I Spare Parts Catalogue – engine only

    Here is another old manual from Dirk. Dirk has a Triumph Renown and a Roadster so being interested in the Vanguard engine has scanned the engine part of the manual only for now. He told me that he could also scan the reminder of the catalogue if anybody is interested but that it would take him sometime.

  • Triumph Service Training service notes for the Borg Warner 35 automatic transmission

    A recent find – Triumph Service Training service notes for the Borg Warner 35 automatic transmission.

  • Triumph TR250 – TR6; wiring diagrams in colour

    Found these wiring diagrams recently. Just checking with the author if I can host copies, but in the meantime you can get them from http://www.advanceautowire.com/