I had never heard of this car let alone seen one until I happened across a brochure on eBay. Looks to be a much better kit than the TR40. Fully built up from £15,000.00 in 1987/88 was big money – wonder if any were actually sold. It is what Robin Hood Engineering made before they moved on to making Lotus 7 type kit. Download the brochure as a PDF. https://app.box.com/s/gnfrp3d2n1iz7l5q9pz22z0ft5q5tcae
The Triumph Enthusiasts Club Belgium are building a new website: http://tecb.be/. Have you got any Dutch Triumph literature that has already been scanned that they can make available to their members. They have got some of the English stuff from my website http://www.vitessesteve.co.uk/ already..
Wildest car was this 480inch 7.8 litre Gasser a local car. As normal a lot of motorbike stuff. Got the nitrile gloves and a small sheet of 0.9 mm alloy I was after.
The annual Standard Triumph forum show was at Brooklands for 2014. What a place never been before, it would have been value for money even without the Triumphs. The Wellington bomber and Hurricane in one of the hangers were in a stage of being rebuilt so seeing all there insides was very interesting. I had not realised that 2nd world war planes still had large areas of their bodywork made from coated clothe.
AC Ace prototype at Brooklands 2014
On my way to see the banking I passed this car. An AC Ace built at Brooklands. That banking is very steep.
There was a good turnout of cars. Including a some of the less often seen oldies.
Fitted my new Specialised Covers Stormshield cover over my TR7
Sprint convertable. Looks to be an excellent product. Fits very well,
they made it to fit over my non-standard Honeybourne Mouldings hardtop.
Only problem I can see is that to use the straps that pass under the car I have to lie on the ground to pass the straps under the car. Car gets new cover and stays snug under its cover but I get wet and or dirty laying on the drive to fit the straps.
There is enough room under the cover for the stubby radio aerial on the rear wing to be folded down. I was offered the option to have Velcro slot for the aerial to poke throu the cover. I like the contrast colour for the door mirror pockets.
PS This blog features on the Club Triumph website along with many other Triumph blogs. I got a helpful suggestion from there – use an extending metal measuring tape under the the car to pull the strap from one side to the other.
A recent exchange on the Club Triumph forum lead to me having a look into TR7 strut braces. I have seen them for sale on eBay and some traders such as S & S Preparations and Robsport sometimes have used ones for sale.
TR7 structbrace made by Andy Healey http://andystr7blog.blogspot.co.uk/
The Wedge Shop another USA based trader http://www.thewedgeshop.com/ stock this interesting looking version (10-11-2013).
Demon Tweaks used to sell a TR7 strut brace but it appears that it currently listed as NLA no longer available. Beans http://www.tr7beans.blogspot.co.uk/ has one fitted to his car.
01 December 2015 – From a very modified car built in the USA comes this strut brace.
Another TR8 V8 modified car hot rodded by D&D fabrication – as owned by Eric Graves in the USA
20 July 2016 – A modified Sprint engined car in the Queensland Australia owned by Matthew Taylor, showing the shiny brace. One from a small batch made in Sydney.
My TR7 Sprint has its heater attached to the engine via some custom plumbing. Here is a picture of the hoses that link the pipes thru the bulkhead to the custom pipe work. Do these look like the normal heater hoses? Are they available separately? I wonder how much are they?
I have tried using lengths of straight rubber but that does not work as the ends to be linked are not inline and there is it not enough room to use a curved straight piece, so I need a hose that is curved as shown in the photo.
They connect to the steel heater pipes that come throu the bulkhead at one end. At the other end having passed to the inlet manifold side of the engine they connect to more metal pipework that in turn connects to the manifold etc. Here are some more pictures to show the detail.
I suppose I may end having to fit a Sprint adapter plate. I want the car back on the road so have refitted the old hoses for now.
Here is a picture of a Dolomite Sprint engine (thanks Beans http://tr7beans.blogspot.co.uk/) Seems this the basis of the heating plumbing on my engine.
TR7 dashboard area showing interior with heater out
This morning I got the heater out. A quick call to Rick at S&S Preparations showed that I had missed a couple of fastening that go throu the bulkhead. To be fair they were covered in a layer black stoneguard so were not easy to see.
Getting to the heater box has meant taking all the fascia out. To get the fascia out had remove the lots of other stuff/trim: the a-post covers, the switch panel, the gear lever console, the steering wheel, the instrument panel, the drivers seat. As my car had various extra had to disconnect the radiator fan override, some of the radio wiring, disconnect the oil pressure gauge from the bottom of the fascia.
Hidden ignition switch and green radiator fan over-ride switch
Whilst the car is in this state I will able to investigate the mystery extra wiring. There is a hidden key/ignition switch which is wired into the ignition loom – trouble is I do not have the key – the switch was well hidden I only found it when I was in the footwell looking up. The flick switch to the left of the steering is still a mystery – it is linked into the radio wiring – which is a really complex bunch of colored wires – think I will leave that alone as it works. Intend to add a proper separate earth for the radio rather than continue to relay on it being lopped into the earth on the back of the rheostat.